Видео

do you know if has a method for calibration on xbox one s or fat controllers?

So its driving me a bit crazy... But iv had the elite controllers since the beginning and just the other day... was the first time I saw this option... I did it... AND NOW I CANT FIND IT ANYWHERE! Its gone.

Do you loose the tension adjustment when you replace the stick modules on the series two controller?

The obligation to have these 2 PCBs soldered so as not to have interference with the triggers is a real thorn in my ass. I want to change my XboX Series sticks myself and there are new potential risks of screwing up that present themselves to me with all this soldering because of this damn interference. Isn't there a simpler solution to isolate the Hall Effect from this small magnetic source? Like a small iron plate that would be placed against the potentiometer? Anyway, thank you for this video. It shows exactly what to solder where and how if I really have to deal with this stain on my controller. This will require me to invest a minimum in a vice system (my little pliers are too weak for such a meticulous task) and a magnifying glass, not to mention the exercises that I will have to do to train myself to squeeze my buttocks properly. The work doesn't seem too difficult, but the extra wires and diodes are what scares me. I would test with metallic self-adhesive tape on the most exposed side of the potentiometer to see if it can avoid all this work. A surface sufficiently sensitive to magnetism can paradoxically act as an insulator. It shouldn't rub the thumbstick and the trigger magnets are far enough away and small enough that it might work. A small elastic band should also be enough to hold it in place if old age and heat loosen the tape. It's not great to have a conductive object that moves freely on a PCB, LMNAO. If it ever works, I will report the result to you (when I take the next step in the still undetermined future ^^).

Some people (myself included) were unable to find this application on the Microsoft Store directly and by downloading the link that takes us to this Microsoft Store page, the download button does not even appear. I found a solution that worked for me and hope it can help others who are experiencing this problem. To do this, I just had to go to the Windows settings to change my region by selecting United States then restarting the Microsoft Store by typing "WSReset" in the Windows search bar then clicking on the green icon for the result this research. You then just have to search for the application in the Microsof Store which, this time, will appear in the results as well as the download button, and you don't even need to restart the computer. It's been days since I tried to recover this damn software by any means possible, notably by looking for a "portable or independent" version but in vain before coming across a forum which gave me this tip. Thanks for this video anyway. I would have liked to see a circularity test before and after calibration with the GamepadTester tools to see the precision provided by this calibration. I plan to soon replace my sticks with Hall Effects and I would like to have a preview of what I can expect from this software. I'm going to play mad scientist a bit. I have an official XboX Series X/S controller and I'm going to buy Elite 2 sticks (those with a screw thread on them and whose spring tension can be adjusted) obviously with screwable thumbsticks adapted to these modules. I would also buy XboX One/Series X/S sticks with their Hall Effect potentiometers to replace those that would be delivered with the Elite 2 sticks in the event that they were not the same (and there is a good chance that this is the case) because, good god, it is difficult to find information on the resistance of these Hall Effects (2.3k or 10k and how to distinguish them), on their sense ( some work in the opposite direction, others for reading the position of the stick) and on which controller uses which pair of potentiometers. I have already replaced the basic Thumbsticks with those from an old, dead Elite 1, on the analog modules. There are no threads to cause problems when refilling and they are exactly the same which worked perfectly. On the other hand, this is not the case with the D-Pad. You can replace the basic D-Pad with the magnetic ones from the Elite 1 but the latter is less deep than the original one. The D-Pad remains a little buried in the casing which makes the use of the cross inconsistent and that of the round module (which looks more like the original) almost unusable, especially for the down key which hooks the cock on the edge of the plastic shell for both cases.

Ive got a connection with cable issue im trying to sort out. Got power but no cable detect. New port and now new power board but still no cable detect.

I have the exact same problem, will you fix it for me if I pay for shipping etc?

What software he used to test controller?

Mine is very specific. i dont want to read ps5 games but everything else works fine

You make it look easy....but I tried this repair and somehow unsoldered the terminals for the pos and neg connection on the board. Now there doesn't appear to be anything to solder to. Any suggestions?

It’s a 300€ controller, that’s unacceptable. This is the reason I modified all my PS5 controllers with Extreme Rate parts, way better and cost saving. Now my last mod will be replacing potentiometers with Hall effect units. At the moment I read Ginfull V5 units are pretty good.

Great Video And Subscribed too keep up the great work

Ok so i need a bit of help i have a PS5 and i need to install the newest update but it gives me an error code SU-101312-8 which means the disc drive is not being read any help would be appreciated! Pin comment if you could

It's honestly crazy that my PS5's laser breaks so easily, when my launch day PS3 is still strong, has way longer playtime, and been in rougher shape lol. I had to replace the laser on my PS5, and now I'm wondering if I should stock up on replacement parts, simply because it seems to be a recurring issue for many people...

Is there a good source for finding Xbox SCUF Instinct Pro parts? I have a friend that requires a specific plastic part that attaches to the lever on the backshell (the clip on the back that basically converts the normal trigger function to a mouseclick). The plastic cap that goes over the lever basically chipped off so now there is no way to reliably press on the mouseclick switch. I'm from the US but any source may help. I'd even take a whole Instinct Pro backshell but I just need a source for that specific piece.

Stop whining man...

Had my HYPR controller for one month and it's doing the exact same thing but when I press the L3 down.

SCUF controllers are notorious for this the cap of the stick scraping the shell sometimes to the point it even gets stuck especially on SCUF Impact where they have replaceable sticks with removable plastic around the stick i have 3 of those all 3 had this issue and i had to order several replacement rings and sanding down them to allow the stick to move properly

Flex cables have no place in a controller imho. ITs not needed and is solely there to make repair more difficult, making MS more money.

terrible audio couldn't watch

Cex is the worst. I went in with a brand new phone I had just bought out of Vodafone and just out curiosity to see what they would grade it, and the girl told me it was a C grade and would get £40 for a phone I paid £250 20 min earlier after showing her the box and the receipt from Vodafone she went bright red and the 3 people who where about to sell a phone walked out the shop waited out side and thanked me 😂😂 what they do is give you a shit grade then send it to another shop as grade A DONT USE CEX

I don't understand the prices for some of these controllers, my gamesir T4K costs 30 quid and looks much better with hall effect triggers and sticks. Works perfectly 1 year after which for some of the scuff controllers would be an achievement.

Another hardcore repair, absolutely a nice work and top notch skills repair. 💪🏻👍🏻

which cex did this?

If the white ribbon cable is damaged, could the Xbox be powered on without it?

Not sure if I have this problem, replacement drive not working (with original board). Drives take the disk but never fully spin, no error code is posted. Any other ideas or way to confirm the IC has gone? Happy to do my own repairs but wouldn’t want to solder as only have a basic £10 one, don’t think that would be good enough for this

2k ain't 1440p

where do you learn how to do this stuff? it looks cool

Beautiful work sir.

Please man explain how you calibrate it

Great video. What kind of glue did you use at the end to repair the broken plastic screw holes?

i do diy repairs and i can do better work then the company that did this job with just a phone for zoom.

What glue do you use for the magnets of the elite series 2?

What glue do you use for the magnets of the elite series 2?

Thats a mad repair. I tried once and just meltes the flex lol

Cex is full of kids who dont have the correct training.

the qulity on a custom mudded controller is sad its like you dont even pay for decent parts at the price point id expect it to be like what you just did not trash

I have a cuestion what happens if i calibrate a Xbox series x or s controller with Hall effect joystick on the xbox app do it works or it would not work help pls and nice video

What a mess! great video :)

Just out of curiosity, do you accept requests from people living in the US or just the UK?

I did a lot of google searching to send my controller for a repair and I found Uber micro repair. Uber repair the best repair!!

cex have not got clue what there doing i often take there work from repair shop in derby

Recommend for all people this guy do brilliant work 👍👊

Great repair and video! I was wondering, if any of the components on these boards go bad and you don’t have a donor board available, where could I find them at? Right now I’m looking for a BPGN. Thanks

Very theraputic to watch

Good video 👍 glad I sent my sticks to you for the Hall Effects upgrade 5 ⭐️ more better to see someone work than trusting than someone in a backroom somewhere btw I have sent a email just asking a quick question

Hey an electronics engineer here I love your videos I'm not sure if you have made a video before as I've only recently started watching you but can you please make a 5 minute video showing how you manually calibrate the joystick modules which is normal speed as opposed to being sped up like in your videos would appreciate it😁

Great job 👍 ... 53:14 i like this, only real (first of all) people speaking like this and then serious repair shop. 100% safe for customers and their stuff. I am an amateur in this job but i have success in changing the flex cable to another new version board (Now crazy thing: only because of the new option for calibrating analogs on the Xbox app 😁). No comment for that Cowboy, he needs to change his job, that is the only way.

That was a mess